 |
|
|
|
|
|
|
|
|||||||||||||||
 |
||||||||||||||||||||||
|
||||||||||||||||||||||
 |
||||||||||||||||||||||
|
Serving Customers Worldwide since 1972 |
||||||||||||||||||||||
 |
||||||||||||||||||||||
|
|
|
|
||
 |
|||||
|
CNC MILL PROGRAMMER/OPERATOR Master Tool & Die is interviewing for a CNC Mill programmer. Experience with Mastercam Software and Class A punch press tooling is desired. This position also performs setup and operation of the vertical mills. Working cooperatively with the team is important. Full time with four day work week available, overtime as needed. Please forward your resume or an e-mail outlining your experience to: or: FAX: 651-454-0619 or: Master Tool & Die, Inc. 1950 Shawnee Road Eagan, MN 55122
CLASS A TOOLMAKER
Master Tool & Die is always interested in reviewing the resumes and experience of Class A Toolmakers. Our toolmakers build and debug progressive dies and stage tools. We are interested in apprentice or journeymen. Ability to work cooperatively with a team and a broad knowledge of the stamping process is important.
Resumes for toolmaker will be kept on file until an opportunity is available.
Please forward your resume to Tony Trabant at: or FAX 651/454-0619 |
|||||